Shelf in plywood birch, plywood

Shelf in birch plywood cut to your measurements.

Cross veneer means that the veneer direction is across the width.

Plywood shelf in birch. A plywood shelf in birch is made up of more layers than e.g. a plywood shelf in pine. In addition, a birch plywood is more dense, so that nicer edges can be achieved than on pine plywood.

The selected edges will be polished nicely, as well as having the sharp edges taken off, so the shelf is pleasing to the touch. Unselected edges will be sharp and you will be able to see the saw cut.

A plywood shelf is easy to saw, screw, glue and mill in.

The edges of a birch plywood shelf can have small openings, which can be filled if you want a smooth sanded surface.

The plywood shelf is sanded on both surfaces.

Available in several thicknesses.

The shelf is untreated, and therefore needs either varnish, soap or oil.

The shelf calculator takes into account how many bearers are to be used depending on the shelf thickness. The thicker the shelf, the fewer shelf brackets. The number of recommended shelf carriers is only indicative, should the shelf carry a large weight, additional supports may be necessary. In addition, the nature of the wall also determines how much the shelf can be affected by weight.

Make sure that the shelf is adequately supported. How much depends on the thickness and shelf size, as well as how much load the shelf is exposed to. If the shelf starts to bend, more support is needed.