Shelf in MDF

MDF shelf cut to your measurements.

MDF boards are perhaps the most widely used DO-IT-YOURSELF board. An MDF board is easy to saw, plane, mill and drill in. In addition, it is also easy to screw and nail in. We recommend sanding the edge after sawing to remove any saw tracks.

The selected edges will be polished nicely, as well as having the sharp edges taken off, so the shelf is pleasing to the touch. Unselected edges will be sharp and you will be able to see the saw cut.

Available in several thicknesses.

The shelf is untreated, and therefore needs either varnish, soap or oil.

The shelf calculator takes into account how many bearers are to be used depending on the shelf thickness. The thicker the shelf, the fewer shelf brackets. The number of recommended shelf carriers is only indicative, should the shelf carry a large weight, additional supports may be necessary. In addition, the nature of the wall also determines how much the shelf can be affected by weight.

Make sure that the shelf is adequately supported. How much depends on the thickness and shelf size, as well as how much load the shelf is exposed to. If the shelf starts to bend, more support is needed.