Shelf in smoked oak veneer

Shelf in smoked oak veneer cut to your measurements.

Beautiful smoked oak veneer glued to an MDF board. There are smoked oak veneers on both sides. An MDF shelf with an oak texture is a very cheap alternative to a solid shelf in smoked oak. In addition, an MDF shelf is very dimensionally stable.

The wood grain is always in the longitudinal direction.

We offer you edging in the same type of wood on the front edge and both ends. If this is not something you want, you can simply unclick the edges where you do not want it. The edges are sanded nicely afterwards so they are pleasing to the touch.

Smoked oak is produced from oak being permeated by ammonia fumes. This interacts with the tannic acid and the oak becomes dark.
It is an old technique that has re-emerged in recent years, and which now forms the natural colour of the wood, so there will be no colour staining.

The veneer is untreated and therefore needs either varnish, soap or oil.

The veneer layer is 0.6 mm thick.

Available in several thicknesses.

The shelf is untreated, and therefore needs either varnish, soap or oil.

The shelf calculator takes into account how many bearers are to be used depending on the shelf thickness. The thicker the shelf, the fewer shelf brackets. The number of recommended shelf carriers is only indicative, should the shelf carry a large weight, additional supports may be necessary. In addition, the nature of the wall also determines how much the shelf can be affected by weight.

Make sure that the shelf is adequately supported. How much depends on the thickness and shelf size, as well as how much load the shelf is exposed to. If the shelf starts to bend, more support is needed.