American cherry veneer edge banding with glue on the back

American cherry veneer edge banding in 23 mm width. Untreated

The banding gives the melamine board a nice finished look and covers the sides and ends so that the core of the chipboard is hidden. The edge banding has a smooth surface that makes it easy to clean without any form of sticking or particles bothering the fingers.

The board is delivered with a glued back. All you have to do is iron the edge with an ordinary iron, just make sure that the steam has been switched off and that the heat is set to medium.

Always mount the edge banding with a little surplus on both sides, as this provides the best final result. Surplus edge is carefully removed with a wood chisel or a sharp stanley knife and final sanding is done with fine sandpaper e.g. grit 180.

The veneer is untreated and should be treated with varnish, soap or oil.

Thickness: 0.6 mm
Width: 23 mm
Maximum length in one piece: 50,000mm (50 m).
Minimum purchase: 1,000 mm (1 m).